Non puoi selezionare più di 25 argomenti Gli argomenti devono iniziare con una lettera o un numero, possono includere trattini ('-') e possono essere lunghi fino a 35 caratteri.

263 righe
9.2 KiB

  1. #
  2. # Sample configuration file for the Samba suite for Debian GNU/Linux.
  3. #
  4. #
  5. # This is the main Samba configuration file. You should read the
  6. # smb.conf(5) manual page in order to understand the options listed
  7. # here. Samba has a huge number of configurable options most of which
  8. # are not shown in this example
  9. #
  10. # Some options that are often worth tuning have been included as
  11. # commented-out examples in this file.
  12. # - When such options are commented with ";", the proposed setting
  13. # differs from the default Samba behaviour
  14. # - When commented with "#", the proposed setting is the default
  15. # behaviour of Samba but the option is considered important
  16. # enough to be mentioned here
  17. #
  18. # NOTE: Whenever you modify this file you should run the command
  19. # "testparm" to check that you have not made any basic syntactic
  20. # errors.
  21. #======================= Global Settings =======================
  22. [global]
  23. ## Browsing/Identification ###
  24. # Change this to the workgroup/NT-domain name your Samba server will part of
  25. workgroup = WORKGROUP
  26. # Windows Internet Name Serving Support Section:
  27. # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
  28. # wins support = no
  29. # WINS Server - Tells the NMBD components of Samba to be a WINS Client
  30. # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
  31. ; wins server = w.x.y.z
  32. # This will prevent nmbd to search for NetBIOS names through DNS.
  33. dns proxy = no
  34. #### Networking ####
  35. # The specific set of interfaces / networks to bind to
  36. # This can be either the interface name or an IP address/netmask;
  37. # interface names are normally preferred
  38. ; interfaces = 127.0.0.0/8 eth0
  39. # Only bind to the named interfaces and/or networks; you must use the
  40. # 'interfaces' option above to use this.
  41. # It is recommended that you enable this feature if your Samba machine is
  42. # not protected by a firewall or is a firewall itself. However, this
  43. # option cannot handle dynamic or non-broadcast interfaces correctly.
  44. ; bind interfaces only = yes
  45. #### Debugging/Accounting ####
  46. # This tells Samba to use a separate log file for each machine
  47. # that connects
  48. log file = /var/log/samba/log.%m
  49. # Cap the size of the individual log files (in KiB).
  50. max log size = 1000
  51. # If you want Samba to only log through syslog then set the following
  52. # parameter to 'yes'.
  53. # syslog only = no
  54. # We want Samba to log a minimum amount of information to syslog. Everything
  55. # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
  56. # through syslog you should set the following parameter to something higher.
  57. syslog = 0
  58. # Do something sensible when Samba crashes: mail the admin a backtrace
  59. panic action = /usr/share/samba/panic-action %d
  60. ####### Authentication #######
  61. # Server role. Defines in which mode Samba will operate. Possible
  62. # values are "standalone server", "member server", "classic primary
  63. # domain controller", "classic backup domain controller", "active
  64. # directory domain controller".
  65. #
  66. # Most people will want "standalone sever" or "member server".
  67. # Running as "active directory domain controller" will require first
  68. # running "samba-tool domain provision" to wipe databases and create a
  69. # new domain.
  70. server role = standalone server
  71. # If you are using encrypted passwords, Samba will need to know what
  72. # password database type you are using.
  73. passdb backend = tdbsam
  74. obey pam restrictions = yes
  75. # This boolean parameter controls whether Samba attempts to sync the Unix
  76. # password with the SMB password when the encrypted SMB password in the
  77. # passdb is changed.
  78. unix password sync = yes
  79. # For Unix password sync to work on a Debian GNU/Linux system, the following
  80. # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
  81. # sending the correct chat script for the passwd program in Debian Sarge).
  82. passwd program = /usr/bin/passwd %u
  83. passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
  84. # This boolean controls whether PAM will be used for password changes
  85. # when requested by an SMB client instead of the program listed in
  86. # 'passwd program'. The default is 'no'.
  87. pam password change = yes
  88. # This option controls how unsuccessful authentication attempts are mapped
  89. # to anonymous connections
  90. map to guest = bad user
  91. ########## Domains ###########
  92. #
  93. # The following settings only takes effect if 'server role = primary
  94. # classic domain controller', 'server role = backup domain controller'
  95. # or 'domain logons' is set
  96. #
  97. # It specifies the location of the user's
  98. # profile directory from the client point of view) The following
  99. # required a [profiles] share to be setup on the samba server (see
  100. # below)
  101. ; logon path = \\%N\profiles\%U
  102. # Another common choice is storing the profile in the user's home directory
  103. # (this is Samba's default)
  104. # logon path = \\%N\%U\profile
  105. # The following setting only takes effect if 'domain logons' is set
  106. # It specifies the location of a user's home directory (from the client
  107. # point of view)
  108. ; logon drive = H:
  109. # logon home = \\%N\%U
  110. # The following setting only takes effect if 'domain logons' is set
  111. # It specifies the script to run during logon. The script must be stored
  112. # in the [netlogon] share
  113. # NOTE: Must be store in 'DOS' file format convention
  114. ; logon script = logon.cmd
  115. # This allows Unix users to be created on the domain controller via the SAMR
  116. # RPC pipe. The example command creates a user account with a disabled Unix
  117. # password; please adapt to your needs
  118. ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
  119. # This allows machine accounts to be created on the domain controller via the
  120. # SAMR RPC pipe.
  121. # The following assumes a "machines" group exists on the system
  122. ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
  123. # This allows Unix groups to be created on the domain controller via the SAMR
  124. # RPC pipe.
  125. ; add group script = /usr/sbin/addgroup --force-badname %g
  126. ############ Misc ############
  127. # Using the following line enables you to customise your configuration
  128. # on a per machine basis. The %m gets replaced with the netbios name
  129. # of the machine that is connecting
  130. ; include = /home/samba/etc/smb.conf.%m
  131. # Some defaults for winbind (make sure you're not using the ranges
  132. # for something else.)
  133. ; idmap uid = 10000-20000
  134. ; idmap gid = 10000-20000
  135. ; template shell = /bin/bash
  136. # Setup usershare options to enable non-root users to share folders
  137. # with the net usershare command.
  138. # Maximum number of usershare. 0 (default) means that usershare is disabled.
  139. ; usershare max shares = 100
  140. # Allow users who've been granted usershare privileges to create
  141. # public shares, not just authenticated ones
  142. usershare allow guests = yes
  143. #======================= Share Definitions =======================
  144. [playlists]
  145. comment = Five Playlists. One for each flat mate.
  146. path = /home/pi/discobert/music
  147. browsable = yes
  148. read only = no
  149. create mask = 0755
  150. guest ok = yes
  151. [homes]
  152. comment = Home Directories
  153. browseable = no
  154. # By default, the home directories are exported read-only. Change the
  155. # next parameter to 'no' if you want to be able to write to them.
  156. read only = yes
  157. # File creation mask is set to 0700 for security reasons. If you want to
  158. # create files with group=rw permissions, set next parameter to 0775.
  159. create mask = 0700
  160. # Directory creation mask is set to 0700 for security reasons. If you want to
  161. # create dirs. with group=rw permissions, set next parameter to 0775.
  162. directory mask = 0700
  163. # By default, \\server\username shares can be connected to by anyone
  164. # with access to the samba server.
  165. # The following parameter makes sure that only "username" can connect
  166. # to \\server\username
  167. # This might need tweaking when using external authentication schemes
  168. valid users = %S
  169. # Un-comment the following and create the netlogon directory for Domain Logons
  170. # (you need to configure Samba to act as a domain controller too.)
  171. ;[netlogon]
  172. ; comment = Network Logon Service
  173. ; path = /home/samba/netlogon
  174. ; guest ok = yes
  175. ; read only = yes
  176. # Un-comment the following and create the profiles directory to store
  177. # users profiles (see the "logon path" option above)
  178. # (you need to configure Samba to act as a domain controller too.)
  179. # The path below should be writable by all users so that their
  180. # profile directory may be created the first time they log on
  181. ;[profiles]
  182. ; comment = Users profiles
  183. ; path = /home/samba/profiles
  184. ; guest ok = no
  185. ; browseable = no
  186. ; create mask = 0600
  187. ; directory mask = 0700
  188. [printers]
  189. comment = All Printers
  190. browseable = no
  191. path = /var/spool/samba
  192. printable = yes
  193. guest ok = no
  194. read only = yes
  195. create mask = 0700
  196. # Windows clients look for this share name as a source of downloadable
  197. # printer drivers
  198. [print$]
  199. comment = Printer Drivers
  200. path = /var/lib/samba/printers
  201. browseable = yes
  202. read only = yes
  203. guest ok = no
  204. # Uncomment to allow remote administration of Windows print drivers.
  205. # You may need to replace 'lpadmin' with the name of the group your
  206. # admin users are members of.
  207. # Please note that you also need to set appropriate Unix permissions
  208. # to the drivers directory for these users to have write rights in it
  209. ; write list = root, @lpadmin